Electrolux U24211 EFT 635 Operating And Installation Instructions - Page 12

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Electrolux U24211 EFT 635. Electrolux U24211 EFT 635 15 pages. Electrolux range hood operation and installation manual

Print Page

Installation

Mounting accessories included

4 screws 5 x 45 mm

4 wall plugs (brick fixing) Ø 8 mm

4 screws 4,2 x 35 mm

1 flange Ø 125 mm

1 allen spanner (for TORX screws)

1 screw 2.9 x 13

Wall unit mounting

• Make the holes on the bottom of the cupboard

(2), using the drilling template (1).

Make a hole for the exhaust pipe (4) if the hood

is to be used in the extraction version (3).

• From inside the cupboard, insert the 4 supplied

screws (5) and tighten them in the appropriate

holes on the appliance.

Wall mounting

• Mark a centre line on the wall (1).

Fit the template onto the wall (2).

• Fix the drilling template to the wall.

• Make 3 Ø 8mm holes in the wall (3), 2 at upper

points, 1 as desired at lower points.

• Insert the three Ø 8mm expansion plugs into the

wall (4) (brick fixing only)..

• Insert 2 5x45 screws (5) but do not tighten them

completely, hang the hood (6).

• Adjust the unit so that it is positioned at a right

angle to the wall by turning the two screws on

lower side (7).

• Tighten the 2 upper screws (8).

• From inside the hood, insert the third 5x45

screw into the lower hole (9) and tighten (10).

Fig. 8 - Wall unit mounting

Fig. 9 - Wall mounting