AirTechnic AHB 32 B User Manual - Page 3

Browse online or download pdf User Manual for Heater AirTechnic AHB 32 B. AirTechnic AHB 32 B 15 pages.

Print Page

1. INFRARED HEATER THEORY

Far-infrared radiant heaters are produced with unique design and manufacturing technique. Using

a specially coated aluminium panel, the heat generated by the heating element is transferred

radiantly to people and objects with maximum efficiency. The heat radiated from the panel surface,

is absorbed by people, walls, floors, furniture etc.

Infrared heating will not lead to air movement, making the air cleaner, as dust and particles are not

disturbed and circulated. Traditional convection heating relies on air movement to distribute the

heat. The air remains less humid and gives you a sense of fresh and comfortable warmth, similar

to the warmth felt from the sun.

2. PERFORMANCE FEATURES

Comfortable : No wind, light or odor will be produced during the running of this product, so the

indoor air is clean without floating dust.

Energy - saving : High heat generation and excellent heat distribution, use less energy than

traditional heating methods.

Reliable : The indoor temperature can be adjusted freely, without being limited by seasonal temperatures.

Physical therapy : The heat radiant can change body microcirculation and cell organization under the

skin producing resonance, cleaning the barrier of microcirculation, adjusting and balancing the nervous

system, promoting metabolism and increasing body physical power. It is very good for people's health.

3. WORKING CONDITIONS

Ambient temperature : -30 ⁰C ÷ +30 ⁰C

Rated voltage : 220 ÷ 240V

Rated frequency : 50 ÷ 60 Hz

Relative humidity : less than 95%

4. INSTALLATION REQUIREMENTS

1. Qualified installer :

The installation must be carried out by trained personnel.

2. Installation conditions :

(I) Supply voltage fluctuation range should be within ± 10%. If not, please revise before installation.

(II) If there is serious security risk within the user's electrical network, the installation must not

proceed, until all problems are resolved.

(III) All electrical wiring must be equipped with earth leakage protection devises and master switch.

(IV) Ground wiring must be connected to the building's grounding device. If not, please consult with

a professional installer. Do not connect ground wires to gas pipes, water pipes, lightning rods or

telephone ground wiring.

Model

AHB 18 B

AHB 24 B

AHB 32 B

Rated Current

Power

[A]

[W]

1.800

7,8

2.400

10,4

3.200

13,9

Infrared Heater AHB

Voltage

[V]

220 ÷ 240

Cable length

[mm]

2.000

500