Bose FreeSpace 16 Service Manual - Page 4

Browse online or download pdf Service Manual for Speakers Bose FreeSpace 16. Bose FreeSpace 16 8 pages.
Also for Bose FreeSpace 16: Installation Manual (12 pages)

Print Page

DISASSEMBLY / ASSEMBLY PROCEDURES

Note: Refer to Figure 2 for the following

procedures.

1. Grille Assembly Removal

1.1 Gently pull the grille assembly (15)

away from the baffle (5). Be careful

not to mark the surface of the grille or

the baffle.

2. Grille Assembly Replacement

2.1 Gently press the grille assembly

(15) down into the baffle (5). Make

sure the grille assembly is fully seated

into the baffle.

3. Transformer, Driver & Rotary Switch

Assembly Removal

3.1 Perform procedure 1.

3.2 Using a cross-head screwdriver,

remove the six screws (1) that secure

the baffle (5) to the enclosure (10).

3.3 Make a note of the wiring configu-

ration and unplug the three wires from

the input terminals (2).

3.4 Using a sleeve barrel driver,

remove the nut that secures the rotary

switch (13) to the baffle (5).

3.5 Using a cross-head screwdriver,

remove the six screws (1) that secure

the driver (7) & transformer (11) to the

baffle.

4. Transformer, Driver & Rotary Switch

Assembly Replacement

4.1 Place the transformer (11), driver (7)

& rotary switch (13) into the baffle (5).

4.2 Secure the driver & transformer in

place using the six screws (1)

removed in procedure 3.5.

4.3 Secure the rotary switch into the

baffle using the nut removed in proce-

dure 3.4.

Note: Be sure the rotary switch is fac-

ing the right direction & make sure the

lock washer is at "7" position when

you replace the rotary switch onto the

baffle.

4.4 Respectively plug the three cable

wires onto the input terminals.Yellow

for "70/100V", white

blue for "8 Ω".

4.5 Secure the enclosure to the baffle

using the six screws removed in

procedure 3.2.

4.6 Perform procedure 2.

for "COM", &