Atlas Copco PHD 26 Repair Instructions - Page 8

Browse online or download pdf Repair Instructions for Drill Atlas Copco PHD 26. Atlas Copco PHD 26 8 pages.

Print Page

Mounting the

Fit the bearing end plate (2). If necessary,

nosepiece

with aid of a plastic hammer.

Insert the washer. First insert a pair of disk

springs with the vault facing upward, then

one pair facing downward, and again one

pair facing upward. Insert another washer.

Fit the gasket. Mount the nosepiece (1)

and secure it with the Allan screw.

Test Run

Test run the machine and pay attention to noises.

Check the direction of rotation!

Let the machine run-in.

Carry out a percussion test.

Electrical Test

Perform an electrical test on the machine (see chapter Electrical and Mechanical Test Instructions).

Repair Instructions No. 162.11/95

PHD 26/ PH(D) 38/ PH 240 D/ PH 350 (D)

PAGE