3M G5 Manual - Page 2

Browse online or download pdf Manual for Headsets 3M G5. 3M G5 10 pages. Drive-thru systems
Also for 3M G5: Quick Reference Manual (2 pages), Technical Bulletin (6 pages), Technical Bulletin (2 pages), Quick Start Manual (3 pages), Technical Bulletin (12 pages), Manual (8 pages)

Print Page

It is recommended you follow the steps outlined below to successfully conduct the upgrade from XT-1 Basestation to G5 Basestation.

1. Disconnect and Remove XT-1 Basestation off the wall

2. Mount G5 Basestation to the wall

3. Re-wire Lane1 - Speaker, Microphone, Loop

4. Install Vehicle Detector Board and any External Antennas.

5. Timer Greet Event

6. Re-wire any external button to change Order Taking Modes, SPLIT/CROSS, or DAY/NIGHT

7. Alert Message Re-wiring

8. Power up the G5 Basestation

9. Register (G5 and/or XT-1) Headsets

10. Connecting to G5 Basestation Web Server (for configuration)

11. Configuring G5 Basestation for Store Operation, Greeter, Alert and Reminder functionality

12. Save the current G5 Basestation settings

The labels on the illustration below correspond to the recommended steps listed above, to properly migrate from XY-1 Basestation to G5

Basestation, outlined in the remainder of this document.

4 & 5

G5 Basestation Wiring Terminals - Reference