Bose L1 Model II Owner's Manual - Page 19

Browse online or download pdf Owner's Manual for Stereo System Bose L1 Model II. Bose L1 Model II 32 pages. Portable line array systems
Also for Bose L1 Model II: Owner's Manual (32 pages), Owner's Manual (28 pages), Technical Data Sheet (8 pages), Technical Data Sheet (8 pages), Application Manual (13 pages), Manual (15 pages)

Print Page
Bose L1 Model II Owner's Manual
Figure 7
Installation of two B1 bass
modules

Connecting two B1 bass modules

Connect the first B1 bass module to the L1 model I power stand as shown in "Connecting
one B1 bass module."
Insert one end of the second B1 bass module cable into the unused jack on the rear panel of
the first B1 bass module. Insert the other end of the cable into one of the jacks on the rear
panel of the second B1 bass module.
CAUTION: Do not connect more than two B1 bass modules to the B1 Bass Module jack on the
L1 model I power stand. Driving more than two B1 bass modules from the B1 Bass Module out-
put will improperly load the amplifier in the L1 model I power stand resulting in poor system per-
formance.
Note: Use only the supplied (blue) B1 bass module 4-wire cable to connect B1 bass modules
to the L1 model I power stand. The L1 model I power stand uses the signals on two of the four
wires to automatically sense how many B1 bass modules are connected to it. DO NOT SUB-
STITUTE the supplied cable with a 2-wire speaker cable.
S
To
B1 Bass Module
ETUP
19