Bose L1 Model II Owner's Manual - Page 18

Browse online or download pdf Owner's Manual for Stereo System Bose L1 Model II. Bose L1 Model II 32 pages. Portable line array systems
Also for Bose L1 Model II: Owner's Manual (32 pages), Owner's Manual (28 pages), Technical Data Sheet (8 pages), Technical Data Sheet (8 pages), Application Manual (13 pages), Manual (15 pages)

Print Page
Bose L1 Model II Owner's Manual
S
ETUP

Connecting a B1 bass module to the L1 model I power stand (optional)

Figure 5
Bass module orientations
Figure 6
B1 bass module
18
The B1 Bass Module jack on the L1 model I power stand can adequately drive one or two B1
bass modules. B1 bass modules can be placed on the floor vertically or horizontally. Up to
four modules can be stacked when placed horizontally (Figure 5).
CAUTION: Do not connect more than two B1 bass modules to the B1 Bass Module jack on the
L1 model I power stand. Driving more than two B1 bass modules from the B1 Bass Module out-
put will improperly load the amplifier in the L1 model I power stand, resulting in less than full sys-
tem performance.
CAUTION: Only B1 bass modules should be used in the B1 Bass Module jack.
B1 bass modules can
be placed vertically or
horizontally

Connecting one B1 bass module

Insert one end of the B1 bass module 4-wire cable into one of the jacks on the rear panel
of the B1 bass module. Insert the other end of the 4-wire cable into the B1 Bass Module jack
on the L1 model I power stand connector panel.
To connect, push the plug
into the jack and rotate it
clockwise to lock it.
To disconnect, slide back the metal tab on the
body of the plug, rotate the plug counterclockwise
and pull it out of the jack.
Note: The B1 bass module connector will click softly upon being properly engaged.
CAUTION: A B1 bass module cannot be shared between two L1 model I power stands.
B1 bass modules can
be stacked in a column
of up to four, maximum
To
B1 Bass Module
B1 bass module 4-wire cable (blue)