Bose Solo 10 series II Important Safety Instructions Manual - Page 3

Browse online or download pdf Important Safety Instructions Manual for Stereo System Bose Solo 10 series II. Bose Solo 10 series II 20 pages. Tv sound system
Also for Bose Solo 10 series II: Faq (3 pages), Service Manual (40 pages)

Bose Solo 10 series II Important Safety Instructions Manual
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Bose Corporation could
void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B) / NMB-3 (B)
This device complies with FCC and Industry Canada RF radiation exposure limits
set forth for general population. It must not be co-located or be operating in
conjunction with any other antennas or transmitters.
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Management Regulation for Low-power Radio-frequency Devices
Article XII
According to "Management Regulation for Low-power Radio-frequency Devices"
without permission granted by the NCC, any company, enterprise, or user is
not allowed to change frequency, enhance transmitting power or alter original
characteristic as well as performance to an approved low power radio-frequency
devices.
Article XIV
The low power radio-frequency devices shall not influence aircraft security and
interfere legal communications; If found, the user shall cease operating imme-
diately until no interference is achieved. The said legal communications means
radio communications operated in compliance with the Telecommunications Act.
The low power radio-frequency devices must be susceptible with the interfer-
ence from legal communications or ISM radio wave radiated devices.
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Cad-
Lead
Mercury
Part Name
mium
(Pb)
(Hg)
(Cd)
PCBs
O
X
Metal parts
O
X
Plastic parts
O
O
Speakers
O
X
Cables
O
X
This table is prepared in accordance with the provisions of SJ/T 11364.
O: Indicates that said hazardous substance contained in all of the homogeneous materials for this part
is below the limit requirement of GB/T 26572.
X: Indicates that said hazardous substance contained in at least one of the homogeneous materials
used for this part is above the limit requirement of GB/T 26572.
Hexava-
Polybromi-
lent
nated Biphenyl
(CR(VI))
(PBB)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Please complete and retain for your records:
Serial numbers can be found on the bottom of the soundbar and on the
packaging for the remote control.
Remote serial number: _________________________________________________
System serial number: _________________________________________________
Purchase date: ________________________________________________________
We suggest you keep your receipt with this owner's guide.
Date of manufacture: The first bolded digit in the serial number indicates the
year of manufacture; "5" is 2005 or 2015.
China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9,
No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
EU Importer: Bose GP, Castleblayney Road, Carrickmacross, Ireland
Taiwan Importer: Bose Taiwan Branch, Room 905, 9F, Worldwide House, 131
Min Sheng East Rd, Section 3, Taipei, Taiwan, 105
The Bluetooth
Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under
license.
Blu-ray Disc
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
©2015 Bose Corporation. No part of this work may be reproduced, modified,
distributed, or otherwise used without prior written permission.
Polybro-
minated
diphenylether
(PBDE)
O
O
O
O
O

Regulatory Information

word mark and logos are registered trademarks owned by
®
and Blu-ray
are trademarks of the Blu-ray Disc Association.
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
English - 3