Bose L1 Model II Owner's Manual - Page 22

Browse online or download pdf Owner's Manual for Amplifier Bose L1 Model II. Bose L1 Model II 32 pages. Portable line array systems
Also for Bose L1 Model II: Owner's Manual (32 pages), Owner's Manual (28 pages), Technical Data Sheet (8 pages), Technical Data Sheet (8 pages), Application Manual (13 pages), Manual (15 pages)

Print Page

Svenska

Nederlands

YSTEM

ETUP

Adding a PackLite

Figure 10

Connecting the A1

amplifier to the power

stand

Italiano

Français

Svenska

Using a PackLite

power amplifier model A1 allows you to add one or two additional B1 mod-

ules to your system. Refer to the A1 owner's guide for detailed operating instructions.

1. Make sure the A1 amplifier power switch is OFF.

2. Plug one end of the supplied ¼" TRS cable into the Bass - Line Out connector on the

power stand. Plug the other end into the INPUT connector on the A1 amplifier.

3. Connect a B1 bass module cable from the OUTPUT connector on the A1 to a B1 bass

module. If desired, connect a second B1 to the first B1.

4. Plug one end of the AC power cord into the A1 amplifier and plug the other end into an

AC (mains) outlet.

5. Switch the A1 power switch to ON (I).

Power stand

Bass - Line Out

CAUTION: DO NOT stack more than four

B1 modules in a column.

Nederlands

Español

Français

Deutsch

Italiano

Deutsch

Español

Dansk

English

Dansk

PackLite

power

amplifier

Additional B1

bass modules