Bose SoundTouch SA-4 Manual - Page 29

Browse online or download pdf Manual for Amplifier Bose SoundTouch SA-4. Bose SoundTouch SA-4 34 pages. Amplifier
Also for Bose SoundTouch SA-4: Owner's Manual (42 pages), Owner's Manual (36 pages)

Print Page

Appendix A: SA-4 amplifier connector panel

POWER

Connector Description

AC power cord connector. Power is applied when the power cord is

POWER

inserted and plugged into an AC (mains) outlet. There is no on/off switch

on the SoundTouch

VCA

Local volume control connector. Allows you to control the volume using

a wall-mounted control. Contact your Bose dealer or call Bose customer

service for information on installing this feature. See the contact list

enclosed in the carton.

SPEAKER

Left and right speaker outputs. Connect only unpowered speakers. A

OUTPUTS

6-ohm minimum load is required. To determine the correct speaker wire

size, see "Speaker cable recommendations" on page 27.

Only switch A is used for SoundTouch

ROOM

CODE

The output of the SoundTouch

switches

be set to stereo (Switch A up) or mono (Switch A

down). The mono output mode feeds left and right

channel audio to both the left and right outputs. This

is useful in situations where a stereo output isn't

feasible such as when outdoor speakers are used in

a large area.

The remaining six switches should remain in the

default configuration:

Status

The green indicator shows the operational state of the SA-4 amplifier.

indicator

See "SoundTouch

BoseLink

Used for connecting the SoundTouch

INPUT

SA-4 amplifier.

BoseLink

Not used.

OUTPUT

VCA

ROOM CODE switches

SPEAKER

OUTPUTS

SA-4 amplifier.

™

SA-4 amplifier status indicator" on page 19.

™

Status indicator

systems.

™

SA-4 amplifier can

™

wireless adapter to the

™

Appendices

BoseLink

OUTPUT

connector

BoseLink

INPUT

connector

Switch B

Down

Switch C

Down

Switch 6

Down

Switch 7

Down

Switch 8

Down

Switch 9

English - 29