Bose SoundTouch SA-4 Manuel - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Bose SoundTouch SA-4. Bose SoundTouch SA-4 34 pages. Amplifier
Également pour Bose SoundTouch SA-4 : Manuel du propriétaire (42 pages), Manuel du propriétaire (36 pages)

Imprimer la page
Bose SoundTouch SA-4 Manuel

Appendix A: SA-4 amplifier connector panel

AC
POWER
Connector Description
AC
AC power cord connector. Power is applied when the power cord is
POWER
inserted and plugged into an AC (mains) outlet. There is no on/off switch
on the SoundTouch
VCA
Local volume control connector. Allows you to control the volume using
a wall-mounted control. Contact your Bose dealer or call Bose customer
service for information on installing this feature. See the contact list
enclosed in the carton.
SPEAKER
Left and right speaker outputs. Connect only unpowered speakers. A
OUTPUTS
6-ohm minimum load is required. To determine the correct speaker wire
size, see "Speaker cable recommendations" on page 27.
Only switch A is used for SoundTouch
ROOM
CODE
The output of the SoundTouch
switches
be set to stereo (Switch A up) or mono (Switch A
down). The mono output mode feeds left and right
channel audio to both the left and right outputs. This
is useful in situations where a stereo output isn't
feasible such as when outdoor speakers are used in
a large area.
The remaining six switches should remain in the
default configuration:
Status
The green indicator shows the operational state of the SA-4 amplifier.
indicator
See "SoundTouch
BoseLink
Used for connecting the SoundTouch
INPUT
SA-4 amplifier.
BoseLink
Not used.
OUTPUT
VCA
ROOM CODE switches
SPEAKER
OUTPUTS
SA-4 amplifier.
™
SA-4 amplifier status indicator" on page 19.
™
Status indicator
systems.
™
SA-4 amplifier can
™
wireless adapter to the
™

Appendices

BoseLink
OUTPUT
connector
BoseLink
INPUT
connector
Switch B
Down
Switch C
Down
Switch 6
Down
Switch 7
Down
Switch 8
Down
Switch 9
Up
English - 29