DROPSA 3905000 User Operating And Maintenance Manual - Page 5

Browse online or download pdf User Operating And Maintenance Manual for Water Pump DROPSA 3905000. DROPSA 3905000 13 pages.

Print Page

5. COMPONENTS

PUMP COMPONENTS

Motor

Connector

Pump

Level indicator (optical in

floating

the picture –

switch

optional)

Filter

Tank

Distributor block

Non-return valve

(optional)

By-pass adjustment screw

Clamping bracket

Pressure switch (optional)

Pressure gauge

Plug

6. UNPACKING AND INSTALLATION

6.1 UNPACKING

Once the suitable location for installation has been identified, open the package and remove the pump. Check that it was not

damaged during transport or storage. The packaging material does not require special disposal precautions as it is not in any

way dangerous or polluting. Refer to the local regulations for disposal.

6.2 INSTALLATION

Pump assembly operations are not required.

Allow a sufficient amount of space for installation, leaving a minimum perimetric space of 100 mm (3,93 in.).

For wall-mounting, suitable space must be provided (see the installation diagram) to prevent abnormal positions or the

possibility of impacts; fixing holes are provided on the plate (see Para. 12).

Then, the pump must be connected hydraulically to the machine. Make the connection to the control panel and fill the tank

(making sure not to exceed the maximum visual level).

Empty the tank during the disassembly phase.

Disconnect the electric part from the hydraulic part.