Beckmann+Egle MD3060 Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Thermometer Beckmann+Egle MD3060. Beckmann+Egle MD3060 16 pages.

Print Page
MD3150/3060

Controls

The thermometer has 4 keys on the top side. When power is supplied, the thermometer
adopts default mode 0 and displays the temperature if the sensor is connected.
Other functions are accessed by pressing the „Mode" key.
Displays
Mode
If while the thermometer is in use the 'Low Bat' signal is detected, the 'Bat' symbol in the
LCD starts blinking. If the 'Low Bat' signal is detected when the thermometer is switched on,
only the blinking 'Bat' symbol is displayed. The thermometer can only be switched off in this
state. Please replace the battery without delay.
Spent batteries must be disposed as hazardous waste.
Connecting the MD3150
The temperature measuring instrument
has two different connections:
•
for 8-pin MINI-DIN plug
This connection can be found on the
front of the temperature measuring
instrument (see figure).
•
9V block battery (battery compartment
on rear side)
Connecting the MD3060
The temperature measuring instrument
has three different connections:
•
for 8-pin MINI-DIN plug
•
for Ni/CrNi temperature sensor
These connections can be found on
the front of the temperature
measuring instrument (see figure).
•
9V block battery (battery compartment
on rear side)
Copyright BECKMANN+EGLE GmbH, All rights reserved.
Battery
depleted
Small display
Large display
Page 4
Function keys
Internet: www.bue.de