Beckmann+Egle MD3060 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Beckmann+Egle MD3060. Beckmann+Egle MD3060 16 pagina's.

MD3150/3060

Controls

The thermometer has 4 keys on the top side. When power is supplied, the thermometer

adopts default mode 0 and displays the temperature if the sensor is connected.

Other functions are accessed by pressing the „Mode" key.

Displays

Mode

If while the thermometer is in use the 'Low Bat' signal is detected, the 'Bat' symbol in the

LCD starts blinking. If the 'Low Bat' signal is detected when the thermometer is switched on,

only the blinking 'Bat' symbol is displayed. The thermometer can only be switched off in this

state. Please replace the battery without delay.

Spent batteries must be disposed as hazardous waste.

Connecting the MD3150

The temperature measuring instrument

has two different connections:

•

for 8-pin MINI-DIN plug

This connection can be found on the

front of the temperature measuring

instrument (see figure).

•

9V block battery (battery compartment

on rear side)

Connecting the MD3060

The temperature measuring instrument

has three different connections:

•

for 8-pin MINI-DIN plug

•

for Ni/CrNi temperature sensor

These connections can be found on

the front of the temperature

measuring instrument (see figure).

•

9V block battery (battery compartment

on rear side)

Battery

depleted

Small display

Large display

Page 4

Function keys

Internet: www.bue.de