Drucker Diagnostics 614B Operator's Manual - Page 5
Browse online or download pdf Operator's Manual for Laboratory Equipment Drucker Diagnostics 614B. Drucker Diagnostics 614B 16 pages.
WARNING: This device is intended to be operated by properly trained
personnel who have carefully read the operating manual and are
familiar with the function of the device. [Refer to the clinical
laboratory method specified by the specimen receptacle
manufacturer or established by the medical technology for the
products applications.]
WARNING: For the safety of both the operator and service personnel, care
should be taken when using this centrifuge if handling substances that are
known to be toxic, radioactive or contaminated with pathogenic
microorganisms. When Risk Group II materials are used, (as identified in
the World Health Organization "Laboratory Bio-Safety Manual"), a Bio-
Seal should be employed. The Bio-Seal accessory for the model is the non-
aerosol shield cap with appropriate tube holders (contact Drucker
Diagnostics to purchase). In the event that materials of a higher risk group
are being used, more than one level of protection must be provided.
The use of flammable or explosive materials as well as those materials
which have a vigorous chemical reaction is prohibited.
For your safety and the durability of your machine, never transport or
store centrifuge with tube holders inside machine.
M
D
ODEL
ESCRIPTION
The Model 614B is a continuous duty centrifuge designed for the small lab
or doctor's office for the purposes of separating laboratory fluids. The unit
is controlled by a mechanical timer settable from 1 to 30 minutes.
Samples can be safely viewed through the transparent lid. In the event
that the lid is opened during a run, the power to the motor is
disconnected.
For warranty information, see page 2 of this manual.
I
U
:
NTENDED
SE
General purpose laboratory centrifuge, intended for the density-based
separation of fluids through centripetal acceleration.
Users should also comply with the specimen receptable manufacturer's
specific instructions for use, in addition to any other protocols established
by the testing organization.
Page | 1 Drucker Diagnostics +1-814-692-7661 - [email protected]