Dry-Matic DM15D Operating Instructions Manual - Page 7

Browse online or download pdf Operating Instructions Manual for Temperature Controller Dry-Matic DM15D. Dry-Matic DM15D 16 pages. Digital controller

Print Page

Dry-Matic Installation Instructions

2. Assembly of Unit

floor.

FAN: Mount fan brackets to side of fan.

HEATER (on heated models): Fit to inlet of fan using 4 screws provided

(note airflow direction for fan is shown by an arrow on the terminal

cover). Ensure airflow direction arrow on heater is the same as

direction on fan, ensure heater is mounted so marked top is installed

upright. Ensure heater is level.

FILTER BOX: Fit to heater (on heated models), or fit to the fan using the

supplied collar, so that the hanging bracket is on the heater/fan inlet

side. Ensure airflow direction arrow on filter is same as fan.

PRE FILTER: Fit white pre filter bag to inlet of filter box.

3. Pre Wiring

Using supplied flying leads, connect attic control unit to fan

and heater (on heated models). Check wiring diagrams on components

carefully.

4. Installing in Attic

cup hooks (x2) to roof structure. Clip supplied bungies (x3) to the three

mounting points on assembled unit. Lift unit into position and hook other

end of bungy cords over cup hooks. Attach duct to fan outlet, taping core

and insulation/outer as before. Adjust length of bungies so unit is level and

tighten cable ties to lock unit into position.

5. Mount Attic and Hall Controllers

controller position (as above), attach to hall controller and attic controller.

6. Power Supply

(by registered electrician).

Commission the unit

7. Set up the unit

pp10-13

8. Check Operation

operating instructions pp4-5.

DM - Operating Instructions, Installation Instructions, Wiring diagrams

It is suggested that this is done in a clear space on the

Lift assembled unit into attic space. Fit supplied

Connect a power supply to attic controller isolating switch

using the hall controller, as per commisioning instructions

check the unit is operating correctly, as for user

Run supplied cat 5 patch lead to hall

See next page

for installation

schematic

(continued)

Version 3.1.765 August 2019