DSC Power 832 Installation Instructions Manual - Page 4

Browse online or download pdf Installation Instructions Manual for Security System DSC Power 832. DSC Power 832 12 pages. Central station talk / listen module
Also for DSC Power 832: Instruction Manual (11 pages), Instruction Manual (18 pages), User Instruction (2 pages), User Manual (20 pages), Installation Instructions (2 pages), Installation Instructions (2 pages), Installation Manual (17 pages)

Print Page

Getting Started

2.1 Connecting the PC5100 Interface Module

Remove all power from the control panel before connecting

any module to the system.

Connect the PC5100 to the PC5010/5015 Keybus by inserting the red,

black, yellow and green Keybus wires into their corresponding termi-

nals.

If the PC5100 is not located within the main cabinet, a PC5204

power supply must be used to power the module, as in the

diagram below.

After wiring is complete, add power back to the PC5010/PC5015.

The system will detect the new module and it will be supervised.

2.2 Calculating Current Draw

Up to 32 addressable devices can be connected to the PC5100.

However, a maximum of 170mA of current can be used on the address-

able loop. Calculate how much current your selection of devices will

require by completing the following table: