DSC PowerSeries PC1832 Installation Manual - Page 8

Browse online or download pdf Installation Manual for Security System DSC PowerSeries PC1832. DSC PowerSeries PC1832 20 pages. System enhancement module
Also for DSC PowerSeries PC1832: Installation Manual (17 pages), Installation Manual (13 pages), Manual (18 pages)

DSC PowerSeries PC1832 Installation Manual

STEP 5: WIRE THE SEM TO THE PANEL

Verify panel AC power is removed and
the backup battery is disconnected.
SEM
+12V
YELLOW (IN)
GREEN (OUT)
GND
Connect panel terminal SEM GND to BLK.
Connect panel terminal
Connect panel terminal
Use the included red cable with the two prong battery connector
to connect the battery to both the SEM and the panel. For a power-
limited circuit, ensure the fuse is inside the PowerSeries panel.
Once wiring is complete, route the antenna(s) outside of the enclosure,
away from the SEM, and replace the enclosure cover. Please note that
the antenna(s) should be routed through the second and third channel
openings at the top of the enclosure (see below).
CDMA/HSPA
Modules
8
YELLOW (IN)
to YEL.
GREEN (OUT)
to GRN.
LTE Modules
12V Battery
RED
BLK
YEL
GRN
PowerSeries Panel