DSC PowerSeries PC1832 Руководство по установке - Страница 8
Просмотреть онлайн или скачать pdf Руководство по установке для Система безопасности DSC PowerSeries PC1832. DSC PowerSeries PC1832 20 страниц. System
enhancement
module
Также для DSC PowerSeries PC1832: Руководство по установке (17 страниц), Руководство по установке (13 страниц), Руководство (18 страниц)
Печатать страницу
STEP 5: WIRE THE SEM TO THE PANEL
Verify panel AC power is removed and
the backup battery is disconnected.
SEM
+12V
YELLOW (IN)
GREEN (OUT)
GND
•
Connect panel terminal SEM GND to BLK.
•
Connect panel terminal
•
Connect panel terminal
•
Use the included red cable with the two prong battery connector
to connect the battery to both the SEM and the panel. For a power-
limited circuit, ensure the fuse is inside the PowerSeries panel.
Once wiring is complete, route the antenna(s) outside of the enclosure,
away from the SEM, and replace the enclosure cover. Please note that
the antenna(s) should be routed through the second and third channel
openings at the top of the enclosure (see below).
CDMA/HSPA
Modules
8
YELLOW (IN)
to YEL.
GREEN (OUT)
to GRN.
LTE Modules
12V Battery
RED
BLK
YEL
GRN
PowerSeries Panel