ANSMANN HD200B Operating Instructions - Page 2

Browse online or download pdf Operating Instructions for Flashlight ANSMANN HD200B. ANSMANN HD200B 3 pages.

Print Page

[GB]

OPERATING INSTRUCTIONS

Many thanks for choosing a product from ANSMANN. With the following instruc-

tions we would like to help you to get the best from the functions of your new

light.

Your ANSMANN Team

CHANGING THE BATTERIES

Make sure to switch the lamp off before changing the batteries. Remove the old

batteries. Always change all of the batteries at the same time. Insert the new

batteries as indicated by the markings on the battery holder.

NOTE! Take care to observe the polarity markings (+/-) in the battery compart-

ment. Otherwise, there may be a risk that the batteries could become damaged

and explode. Ensure that you do not short-circuit the contacts. Keep the con-

tacts away from any metal or damp objects when changing the batteries. Then

close the battery compartment again.

Never attempt to recharge non-rechargeable batteries. Never use new batteries

and used batteries together. Use only high-quality batteries of the same type.

Always change all of the batteries at the same time. The use of rechargeable

batteries and high-current batteries is not permitted due to other electrical cha-

racteristics. In the event that this light will not be used for an extended period of

time, ensure that the batteries are removed to avoid damage. Empty batteries

must be removed.

ENVIRONMENTAL INFORMATION

The device should not be discarded in the normal household waste under any

circumstances. Dispose of the device via an authorised disposal centre or your

communal waste disposal facility. Observe the current applicable regulations.

Contact your waste disposal facility in the event of any doubt. Dispose of all

packaging materials via an environmentally friendly disposal facility. Used bat-

teries and rechargeable batteries are special waste and must be disposed of in

accordance with national regulations.

SAFETY INSTRUCTIONS

Avoid eye injuries - Never look directly into the beam of light or shine it into other

people's faces. If this occurs for too long, the blue light portion of the beam can

cause retinal damage. If the light beam shines into the eyes, close the eyes and

turn the head away from the light beam. Keep the product and the packaging

away from children. This product is not a toy. Clean the device only with a dry

cloth.

This lamp exceeds the conditions for risk-free use. The risk when using it de-

pends on how the user handles the lamp.

NOTE: Hazardous optical radiation may be omitted by this

product. When operating, do not look into the lamp for an

extended period of time. Can be hazardous to the eyes.

Gefahrenwert der Exposition / Exposure Hazard Value (EHV)(1): 76

Risk group

Free group

(1)This value indicates the factor by which the risk group limit value to the next

lowest group has been exceeded. The limit value is 1.

(2)Distance from eyes to the lamp at which the respective risk group is applicable.

LIMITATION OF LIABILITY

The information contained within these operating instructions can be changed

without prior notification. ANSMANN accepts no liability for direct, indirect, inci-

dental or other damage or consequential damage arising though improper hand-

ling or through disregard of the information contained within these operating

instructions.

GUARANTEE

The device has a two year guarantee. The guarantee does not apply to damage

to the device arising through a failure to comply with the operating instructions.

Subject to technical changes. We assume no liability for printing errors. 11/2017

RISK GROUP 2

Gefährdungsabstand / Hazard Distance (HD)(2)

0m – 1,74m

1,74m – 17,4m

> 17,4m