ANSMANN HD200B Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Latarka ANSMANN HD200B. ANSMANN HD200B 3 stron.
Drukuj stronę[GB]
OPERATING INSTRUCTIONS
Many thanks for choosing a product from ANSMANN. With the following instruc-
tions we would like to help you to get the best from the functions of your new
light.
Your ANSMANN Team
CHANGING THE BATTERIES
Make sure to switch the lamp off before changing the batteries. Remove the old
batteries. Always change all of the batteries at the same time. Insert the new
batteries as indicated by the markings on the battery holder.
NOTE! Take care to observe the polarity markings (+/-) in the battery compart-
ment. Otherwise, there may be a risk that the batteries could become damaged
and explode. Ensure that you do not short-circuit the contacts. Keep the con-
tacts away from any metal or damp objects when changing the batteries. Then
close the battery compartment again.
Never attempt to recharge non-rechargeable batteries. Never use new batteries
and used batteries together. Use only high-quality batteries of the same type.
Always change all of the batteries at the same time. The use of rechargeable
batteries and high-current batteries is not permitted due to other electrical cha-
racteristics. In the event that this light will not be used for an extended period of
time, ensure that the batteries are removed to avoid damage. Empty batteries
must be removed.
ENVIRONMENTAL INFORMATION
The device should not be discarded in the normal household waste under any
circumstances. Dispose of the device via an authorised disposal centre or your
communal waste disposal facility. Observe the current applicable regulations.
Contact your waste disposal facility in the event of any doubt. Dispose of all
packaging materials via an environmentally friendly disposal facility. Used bat-
teries and rechargeable batteries are special waste and must be disposed of in
accordance with national regulations.
SAFETY INSTRUCTIONS
Avoid eye injuries - Never look directly into the beam of light or shine it into other
people's faces. If this occurs for too long, the blue light portion of the beam can
cause retinal damage. If the light beam shines into the eyes, close the eyes and
turn the head away from the light beam. Keep the product and the packaging
away from children. This product is not a toy. Clean the device only with a dry
cloth.
This lamp exceeds the conditions for risk-free use. The risk when using it de-
pends on how the user handles the lamp.
NOTE: Hazardous optical radiation may be omitted by this
product. When operating, do not look into the lamp for an
extended period of time. Can be hazardous to the eyes.
Gefahrenwert der Exposition / Exposure Hazard Value (EHV)(1): 76
Risk group
2
1
Free group
(1)This value indicates the factor by which the risk group limit value to the next
lowest group has been exceeded. The limit value is 1.
(2)Distance from eyes to the lamp at which the respective risk group is applicable.
LIMITATION OF LIABILITY
The information contained within these operating instructions can be changed
without prior notification. ANSMANN accepts no liability for direct, indirect, inci-
dental or other damage or consequential damage arising though improper hand-
ling or through disregard of the information contained within these operating
instructions.
GUARANTEE
The device has a two year guarantee. The guarantee does not apply to damage
to the device arising through a failure to comply with the operating instructions.
Subject to technical changes. We assume no liability for printing errors. 11/2017
RISK GROUP 2
Gefährdungsabstand / Hazard Distance (HD)(2)
0m – 1,74m
1,74m – 17,4m
> 17,4m