ATsens AT-Patch User Manual - Page 3
Browse online or download pdf User Manual for Personal Care Products ATsens AT-Patch. ATsens AT-Patch 14 pages.
Also for ATsens AT-Patch: Quick Manual (2 pages), Quick Manual (6 pages), User Manual (14 pages)
Print Page
How to attach the device
Checking the area to attach the device
1
Draw an imaginary line between the two clavicles and left nipple, and
check the position to ensure the device is attached to the center of the
area.
Shaving and exfoliating the device attachment area
2
If there is a lot of chest hair in the area where the device will be attached,
use a razor to remove the chest hair and remove foreign substances such
as dead skin cells.
Cleaning the area where the device will be attached with alcohol
3
1) Wash the attachment area with an alcohol swab for at least 1 minute.
2) Wash with alcohol and dry for at least 2 minutes.
4
02
Attach and Installation
4
5
Power Button
(3 seconds)
6
My ECG
Detaching the Film & Attaching the device
Detach the device from the transparent protective film. And attach
the device with the side marked with "Up" facing up.
Turning on the power
Press the power button of the device for more than 3 seconds and
the color of the button will change to green, flash 3 times, and make
a sound.
ECG signal check
1) After attaching, check the signal status in AT-Note App.
(Can be moved 2-3 times depending on the signal condition.)
2) After confirming the signal, press the entire area for more than
10 seconds.
02
Attach and Installation
5