ATsens AT-Patch Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Средства личной гигиены ATsens AT-Patch. ATsens AT-Patch 14 страниц.
Также для ATsens AT-Patch: Краткое руководство (2 страниц), Краткое руководство (6 страниц), Руководство пользователя (14 страниц)

How to attach the device

Checking the area to attach the device

Draw an imaginary line between the two clavicles and left nipple, and

check the position to ensure the device is attached to the center of the

area.

Shaving and exfoliating the device attachment area

If there is a lot of chest hair in the area where the device will be attached,

use a razor to remove the chest hair and remove foreign substances such

as dead skin cells.

Cleaning the area where the device will be attached with alcohol

1) Wash the attachment area with an alcohol swab for at least 1 minute.

2) Wash with alcohol and dry for at least 2 minutes.

Attach and Installation

Power Button

(3 seconds)

My ECG

Detaching the Film & Attaching the device

Detach the device from the transparent protective film. And attach

the device with the side marked with "Up" facing up.

Turning on the power

Press the power button of the device for more than 3 seconds and

the color of the button will change to green, flash 3 times, and make

a sound.

ECG signal check

1) After attaching, check the signal status in AT-Note App.

(Can be moved 2-3 times depending on the signal condition.)

2) After confirming the signal, press the entire area for more than

10 seconds.

Attach and Installation