DT Research DT430 Basic Operation Manual - Page 2

Browse online or download pdf Basic Operation Manual for Touch terminals DT Research DT430. DT Research DT430 2 pages. Handheld pos terminal
Also for DT Research DT430: Basic Operation Manual (4 pages)

Print Page
DT430
DT430
A
E
F
B
C
D
Button Functions
Enable/ disable soft
keyboard (Programmable)
Programmable
System Utility
DT430 I/O Ports
Right
USB 1.1 host
DC-in
Audio jack
Scanner trigger button
Left
Scanner trigger button
DT430 LED Status Indicators
1. Power Mode Status Indicator:
•
Blue: Device is powered on
•
Blinking Blue: Main battery charging
•
Orange: Low battery mode
•
Blinking Orange: Extremely low battery
mode
•
Off: Device is powered off or in suspend
mode
2. Wi-Fi Status Indicator:
•
Blue: The device has been connected to a wireless AP
•
Blinking blue: The device is connecting to a wireless AP
•
Off: Wi-Fi is disabled
3. Magnetic Stripe Reader Indicator:
•
Power On – Powering on Sequence: blinks orange 2 times, then lights solid blue
•
Ready – Solid blue
•
Read Ok – Blinks blue 1 time
•
Read Error – Orange and then turn to blue
2
ENGLISH
G
A
Magnetic Stripe Reader
B
Programmable buttons
C
Suspend/ Resume
D
Speaker
E
Power button
F
Battery
G
Battery pack switch
Suspend/ Resume
+
Touch screen calibration
Hold
press
Top
Stylus
Scanner sensor
Bottom
Cradle connector
ACCESSORIES:
SPECIFICATIONS
System
Processor
Memory (RAM)
Operating System
Display
Display Resolution
Network Interface
Control Switch and Buttons
Indicator
Speaker/ Microphone
Input/Output Ports
Power
AC/DC Adapter
Backup Battery
1
Battery Type
2
Mechanical
3
Enclosure
Stylus
Dimensions (H x W x D)
Weight
Environmental
Regulatory
Water and Dust Resistance
Operating Temperature
Humidity
* Specifications subject to change without notice.
Charging Cradle
PN: ACC-400-01
Desktop cradle with rear pocket battery charger and data synchronization
with PC via USB port.
Input: 100 - 240V AC; output: 5V DC, 3A.
4-bay Gang Charger
PN: ACC-400-02
Wall mountable charger, capable of charging up to 4 handhelds
simultaneously.
AC-DC Adapter
PN: ACC-400-03
Used to charge handheld battery, and pass through power for charging
cradle.
Battery
PN: ACC-400-04
Hot-swappable, rechargeable Li-Ion battery 3800mAh, 3.7V (14 Watt-hour).
Trigger Grip
PN: ACC-400-05
For single hand operation to trigger scanner or other functions conveniently.
ARM 533 MHz
128MB DDR II, 128MB Flash ROM
Microsoft® Windows® CE 6.0 or Windows® Mobile 6
4.3" TFT-LCD with resistive touch; outdoor-viewable display
272 x 480 (WQVGA)
Built-in IEEE 802.11b/g WLAN, Bluetooth 2.1 with EDR
1 power button; 4 front buttons; 2 trigger buttons
1 power-on LED indicator, 1 WLAN enable/ communication indicator, 1 MSR indicator
Built-in speakers; 1 mono microphone
1 headset jack, 1 USB 1.1 host, 1 cradle interface (USB2.0 and charging), 1 DC-in jack
Input: 100 – 240V AC; Output: 5V DC, 3A
180 mAh
Li-ion battery 3760 mAh, 3.7V
PC+ABS, TPR
Non-electronic tip
6.3 x 3.4 x 1.2 in/ 160 x 86 x 30 mm
0.9 lbs/ 415 g
FCC Class B, CE, C-Tick, RoHS compliant
System: IP54; Front Panel: IP65
Operation: 0°C - 40°C; Storage: -20°C - 60°C
0% - 90% non-condensing
3
ENGLISH