ATV IPVD3RWI Quick Manual - Page 13

Browse online or download pdf Quick Manual for Security Camera ATV IPVD3RWI. ATV IPVD3RWI 16 pages. 3mp vca vp dome network camera

Print Page

2.3 Resetting to the factory default settings

To reset the network camera to the original factory settings, go to the Setup > System >

Maintenance web page (described in "System > Maintenance" of User's Manual) or use

the Reset button on the network camera, as described below.

Reset Button

• Using the Reset button:

Follow the instructions below to reset the network camera to the factory default settings

us- ing the Reset button.

1. Switch off the network camera by disconnecting the power adapter.

2. Press and hold the Reset button while reconnecting the power.

3. Keep the Reset button pressed during about 2 seconds or more.

4. Release the Reset button.

5. The network camera resets to factory defaults and restarts after completing the

factory reset.

CAUTION: When performing a Factory Reset, you will lose any settings that have

been saved. (Default IP 192.168.30.220)