ATV IPVD3RWI 빠른 매뉴얼 - 페이지 13

{카테고리_이름} ATV IPVD3RWI에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATV IPVD3RWI 16 페이지. 3mp vca vp dome network camera

2.3 Resetting to the factory default settings

To reset the network camera to the original factory settings, go to the Setup > System >

Maintenance web page (described in "System > Maintenance" of User's Manual) or use

the Reset button on the network camera, as described below.

Reset Button

• Using the Reset button:

Follow the instructions below to reset the network camera to the factory default settings

us- ing the Reset button.

1. Switch off the network camera by disconnecting the power adapter.

2. Press and hold the Reset button while reconnecting the power.

3. Keep the Reset button pressed during about 2 seconds or more.

4. Release the Reset button.

5. The network camera resets to factory defaults and restarts after completing the

factory reset.

CAUTION: When performing a Factory Reset, you will lose any settings that have

been saved. (Default IP 192.168.30.220)