ATV aD5 Quick Start Manual - Page 9

Browse online or download pdf Quick Start Manual for Drums ATV aD5. ATV aD5 16 pages.
Also for ATV aD5: Quick Start Manual (16 pages)

Print Page

Trigger settings

You'll need to make trigger settings when using the aD5 for the first time or after you've changed
the types of pads. This allows the data from the pad sensors to be processed correctly so that the
aD5's performance capabilities can be fully utilized.
The aD5 has two settings wizards, allowing you to complete the settings simply by striking pads
as directed in the screen.
<1> Crosstalk Cancel Wizard
This prevents "crosstalk," when the vibration from hitting one pad is transmitted to another pad
causing it to sound.
1
Press the [HOME] button, and then press
[
]
2
Select the [SYSTEM] tab, and then press
[TRIGGER]
3
Press [Crosstalk Cancel Wizard]
4
As directed in the screen, strongly hit the
specified pad three times.
Specified pad
* If you press [RETRY], the previous strikes are
discarded.
5
When the screen indicates "OK" press
[NEXT] to proceed
6
Repeat steps 4—5 in the same way
The aD5 calculates the state of crosstalk for
all of the connected pads.
* We recommend that you play a rimshot when
striking the snare pad.
* If the specified pad is not connected, press [SKIP].
7
When the following screen appears,
play the pads to verify that there is no
crosstalk, and then press [NO]
* If there is crosstalk, press [YES] and repeat the
wizard once again.
In some cases, it might not be possible to
completely eliminate crosstalk. The following
actions might improve the situation.
• Increase the distance between the pads.
• Mount the pads on separate stands.
• Place the system on a stable floor.
• Adjust the tension of the mesh pads.
OK
indication
9
1 Getting Ready