Auber Instruments WS Series Quick Manual - Page 14

Browse online or download pdf Quick Manual for Controller Auber Instruments WS Series. Auber Instruments WS Series 14 pages. Programmable pid temperature controller with dual probe
Also for Auber Instruments WS Series: Quick Manual (15 pages), Quick Manual (14 pages), Operation & Instruction Manual (18 pages), Operation & Instruction Manual (18 pages)

Print Page

Auber Instruments WS Series Quick Manual

normal operating mode and will start run the current program.

Store your program as recipe (Single-step Mode)

Before you input your set temperature, check the PrG = off (accessed by LCK code "3").

Press SET key once, and then set C-1=150, press set again to confirm and exit. The

controller will go back to the normal operating mode and start running on this single-step

program.

To store current program back to recipe b2, long press SET, set LCK=2, choose b2,

press set to confirm and exit. Now your current program is stored as recipe b2.

Recall your recipe to current program (Single-step Mode)

Before you input your set temperature, check the PrG = off (accessed by LCK code "3").

Long press SET, set LCK=1, choose b2, press set to confirm and exit.

Now the C-1 from the recipe b2 is recalled back to your current program. The controller

will start run at this temperature setting.

Advanced example

This example will show you how the PrG mode can affect the saved and current

recipe/program.

1) Set PrG = on, select "b1" recipe:

C-1=120, E-1=t, t-1=2.0;

C-2= 290, E-2= F, F-2=160;

C-3=130, E-3=t, F-3=30.0;

2) Change PrG = off, now the current single-step program is:

C-1: 120.

3) Set current C-1 to 200, then store current program back to recipe b1. Now the b1

recipe is:

C-1: 200.

4) Change PrG = on, current b1 recipe is:

C-1=200, E-1= t, F-1=2.0;

C-2=190, E-2=F, F-2=160;

C-3= 130, E-3=t, F-3=30.0.