DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center Installation Manual - Page 15

Browse online or download pdf Installation Manual for Recording Equipment DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center. DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center 19 pages. Thunderbolt 3, dante, madi and adat modular analogue & digital audio interface

Print Page
Installation Guide AX Center
Analogue I/O Connections on
optional DAD I/O Cards
Pin out
Doc no. AXCNTR-8001-A-4
Analogue I/O 25 pole female D-sub connectors
These are interfaced via 25 pole D-sub connectors on the card, which
is accessible from the rear panel of the AX Center chassis.
This connector type is used both for the analogue Line input card and
the analogue Line output.
Below, the connection for the 25 pole D-sub connector is listed. The
pinning is in accordance with the proprietary standard by the
company Tascam. The pinning is for each group of 8 channels.
Connections channel 1-8
Pin no
Func.
1
AIN/OUT 8 +
2
GND
3
AIN/OUT 7 -
4
AIN/OUT 6 +
5
GND
6
AIN/OUT 5 -
7
AIN/OUT 4 +
8
GND
9
AIN/OUT 3 -
10
AIN/OUT 2 +
11
GND
12
AIN/OUT 1-
13
N.C.
Rev. date 221023
.
Pin no
Func.
14
AIN/OUT 8 -
15
A/IN/OUT 7 +
16
GND
17
AIN/OUT 6 -
18
AIN/OUT 5 +
19
GND
20
AIN/OUT 4 -
21
AIN/OUT 3 +
22
GND
23
AIN/OUT 2 -
24
AIN/OUT 1 +
25
GND
Page 15 of 19