DAN DRYER 244 Turbo Maintenance And Service Manual - Page 4

Browse online or download pdf Maintenance And Service Manual for Dryer DAN DRYER 244 Turbo. DAN DRYER 244 Turbo 12 pages.

Print Page

Reference

Version

244-ENG

09-01-2018

Sensing range adjustment:

The sensing range of the hand dryer is pre-set by the manufacturer.

We recommend that the sensing range is NOT adjusted by the user.

If you wish to modify the sensing range anyway, please proceed according to the following instructions:

1. Cut off the power supply to the hand dryer

2. Remove the cover by loosening the Allen screws at the

bottom of the housing. This can be done with the special

Allen key originally supplied with your hand dryer.

3. The sensing range adjusting screw is located as shown

in Fig. 1.

Use a tiny screwdriver to carefully turn the adjusting screw.

a. Turn clockwise to lengthen the sensing range.

b. Turn counter-clockwise to shorten the sensing range.

4. Remount housing and test run the hand dryer.

Turn clockwise to lengthen

the sensing range.

Fig. 1

Air speed adjustment:

If a lower noise level is desired, air speed may be

adjusted by turning the adjusting screw located inside

and at the bottom of the hand dryer cover.

Turn clockwise to increase air

speed and anti-clockwise to reduce

air speed.

DAN DRYER A/S • Tåsingevej 2 • DK-8940 Randers SV • Tel: +45 86 41 57 11 • Email: [email protected]

Document

244 DAN DRYER Turbo (with nozzle)

Maintenance and service manual

Turn counter-clockwise to

shorten the sensing range.

Lang.

Page

ENG

4 of 12

Remove the

cover screws