DAN DRYER 3000 Maintenance And Service Manual - Page 3

Browse online or download pdf Maintenance And Service Manual for Dryer DAN DRYER 3000. DAN DRYER 3000 13 pages. Hand dryer

Print Page

Reference

Version

3000-ENG

08.01.2018

Installation and connection:

To protect the user against electric shock, it is important that the hand dryer is connected to the earth wire.

For fixed installation, connect via circuit breaker.

1. Remove the two cover screws at the bottom

of the cover using the supplied special Allen

key. Carefully remove the housing from the

base plate.

Remove the

cover screws

2. Attach the base plate to the wall using ap-

propriate screws in the four mounting holes.

Wiring can be hidden behind the machine or

may alternatively be fed through the bottom

of the cover.

Hole for wall

mounting

screw

Hole for wall

mounting

Cut-out

screw

for wiring

through the

bottom

DAN DRYER A/S • Alsikevej 8 • DK-8920 Randers NV • www.dandryer.com • [email protected]

Document

3000 DAN DRYER Hand dryer.

Maintenance and service manual

3. Do not mount directly above sink or the like.

4. Connect wires as follows:

Hole for wall

mounting

5. Remount the cover using the two cover

screw

Hole for hidden

wiring

Hole for wall

mounting

screw

Lang.

Minimum distance 300 mm.

A. Connect the live wire (red or brown) to the

terminal block marked "L".

B. Connect the neutral wire (blue or black) to

the terminal block marked "N".

C. Connect the green and yellow earth wire to

the screw marked "

screws at the bottom of the cover and test

run the hand dryer.

Page

3 of 12