AnyBeam HD301M1-H2 User Manual
Browse online or download pdf User Manual for Projector AnyBeam HD301M1-H2. AnyBeam HD301M1-H2 3 pages. Mems laser scanning projector
Print Page
Mems Laser Scanning Projector
User Manual
I
S
MPORTANT
• Do not apply any strong force or shocks to the projector, otherwise damage may
occur.
• Do not use the projector outside the required temperature range (0-35°C/ 32-95°F).
This
may cause an unstable display and could lead to damage.
• Do not expose the projector to water or sources of heat.
• Avoid looking directly
might cause
damage to the eyesight.
U
I
ser's
nstruction
1.
The unit has no built-in battery. Please connect the Micro USB interface for power supply.
2.
Do not press the jog lever
It may result in functional failure or damage to the portable device.
3.
There are two major factors
•
Ambient Lighting
To achieve better projection effect, please draw the curtain and turn off the light.
•
Projection Distance
The distance between projector and the screen affects the projection brightness. The
shorter distance, the brighter screen.
For the figure shown below, determine the image size that can be projected under different
lighting conditions.
70"~100"
~2-3m
Note:
Relationship between
projection screen size (W) :D/W
Audio Jack
[ 3.5mm headphone/ speaker jack ]
Note 01: AnyBeam suggests 720p resolution input. Some other resolution might not be projected.
Lens
Laser radiates from this aperture
LED Indicator
LED Indicator 1 remains on
LED Indicator 2 remains on
LED Indicator 1 flashes rapidly
LED Indicator 2 flashes every 3 seconds
Specifications and Features
Model
Imaging Technology
Resolution
Brightness
Contrast Ratio
Color Gamut
Throw Ratio
Focus
Input / Output
Rated Voltage/ Current
Operating Temperature
Dimensions (W x H x D)
Weight
I
AFETY
NSTRUCTION
at
the projector laser beam when turned on. The laser beam
WHICH
24"~36"
~1m
the distance from the projector to screen (D) and
=
1.37 (
Throw Ratio)
NUT (SCREW)
HDMI Jack
[ Note 01 ]
HD301M1-H2
MEMS Laser Scanning
720P / 60fps ( Input )
ANSI 30 lumens ±10% ( equivalent to 150 lumens)
80,000：1
>150%
1.37
Focus-Free
Audio Output: 3.5mm Audio Jack
Speaker: 1.0W ( Max. )
Interface: HDMI
DC 5V / 1.5A
0°C ~ 35°C (32°F ~ 95°F) @50% white chart
Approx. 103 x 60 x 19 mm
Approx. 140 ±10% gram
and slide
or
at the same time while using the projector.
must be considered while using the AnyBeam
Complete Darkness
Semi Dark [Dimmed Lighting]
Semi-Lit [Home / Office]
<12"
~0.3m
the width of
[UNC 1/4"-20]
Micro USB Jack
[ Power Input 5V/1.5A ]
Speaker
Device Status
Function normal. Power is ON
Function normal. HDMI cable is connected
Function abnormal. Please see the Troubleshooting
Function normal. Standby and Power Saving Mode
Rev. A01 202
LED Indicator 1
[Power Status
]
LED Indicator 2
[ HDMI Connection Status ]
Jog Lever
(
/
/
)