Anyload EC200 Operating Manual - Page 16

Browse online or download pdf Operating Manual for Scales Anyload EC200. Anyload EC200 16 pages.
Also for Anyload EC200: User Manual (8 pages)

Print Page
Anyload EC200 Operating Manual
Take care during cleaning that no liquid penetrates into the appliance. If liquid is spilt on the balance,
the latter must immediately be disconnected from the electricity supply. The balance may only be used
again after it has first been checked by a service engineer.
The connections on the rear of the appliance and the power adapter may not come into contact
with liquids.
Regularly dismantle the weighing pan and the weighing pan holder and remove any dirt or dust from
under the weighing pan and on the weighing machine housing with a soft brush or a soft, lint-free cloth,
moistened with a mild soap solution. The scale and the holder can be cleaned under running water.
Take care that both parts are completely dry before they are re-installed on the scale.
Never use solvents, acids, alkalis, paint thinners, scouring powders or other aggressive or corrosive chemicals
for cleaning, since these substances attack the surfaces of the scale housing and
can cause damage.
7 Transport, storage
7.1 Transportation and shipping of the weighing machine
Your weighing machine is a precision instrument. Treat it carefully. Avoid shaking, severe impacts
and vibration during the transportation.
Take care that there are no marked temperature fluctuations during the transportation and that
the weighing machine does not become damp (condensation).
7.2 Storage of the weighing machine
If you would like to take the weighing machine out of service for an extended period, disconnect it
from the electricity supply, clean it thoroughly (see Section 6.Maintenance and servicing.) and store it
in a place which meets the following conditions:
 No violent shaking, no vibrations
 Minimum temperature fluctuations
 No direct solar radiation
 Minimum moisture
The weighing machine should preferably be dispatched and transported in the original packaging to
avoid transportation damage.
The weighing machine should preferably be stored in the original packaging, since this provides
optimal protection for the weighing machine.
Page 16 of 16
AL-manual-EC200-En-V2