AnyTone MyAmplifiers V-15W Installation Manual - Page 12

Browse online or download pdf Installation Manual for Extender AnyTone MyAmplifiers V-15W. AnyTone MyAmplifiers V-15W 20 pages. Mobile signal repeater

Print Page

3. In order to prevent water from coming into the mobile phone booster through the cable make a

loop in it.

4. Keep the outdoor antenna as far as possible from frequency aerials, high voltage cables, metal

nets or transformers.

5. Never point the front of a Directional outdoor antenna towards the indoor antenna.

6. Plug the power supply into the Signal Booster input (carefully, to avoid damaging the center pin)

and then into a wall outlet.

Note: It is recommended to plug all AC power supplies for home electronics into a Surge

Protector Power Strip.

7. If the light indicator doesn't turn on, please see the lights indication instructions.

8. Using multiple Signal Boosters in one installation could cause interference to the base station

(except for the In-Line Signal Boosters).

7.2.2. Repeater's ports description

1. Outdoor port: connected with the outdoor antenna by cable

2. Indoor port: connected with indoor antenna directly or by cable

3. DC IN: connected with power supply.

7.2.3. Accessories selection

Choosing accessories pay attention to the two characteristics – frequency and impedance. All

accessories shall support the repeater's frequencies. For example, if the repeater's frequency is

GSM900, all the accessories must support the GSM900 frequency.