Dudley Wave S3 Manual - Page 4
Browse online or download pdf Manual for Controller Dudley Wave S3. Dudley Wave S3 8 pages. Smart flush actuator
Print Page
3
Connections
Step 1
Connect pneumatic tubes.
Full Flush
Connect white/clear
pneumatic tube to the
port marked with a full
round symbol.
Partial Flush
Connect green pneumatic
tube to the port marked
with a half round symbol.
Step 2
Connect power supply
Wiring Transformer
Wire the transformer to a suitable 3A
fused spur. Ensure all electrical work is
undertaken by a qualied electrician
and is in compliance with all relevant
statutory electrical standards.
Power Up
Plug the power jack into
the socket in the rear of
the unit.
Note: When powered up
the front icons will ash
red, green then blue.
Step 3
Flush test. Place the unit onto the mounting frame (no need to lock) and initiate
a full and partial ush independently by waving a hand in front of the ush icon.
If successful proceed to Section 5 Fill Delay
If either or both ushes were unsuccessful proceed to Section 4 Boosting