Dudley Wave S3 Podręcznik - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik dla Kontroler Dudley Wave S3. Dudley Wave S3 8 stron. Smart flush actuator

Connections

Step 1

Connect pneumatic tubes.

Full Flush

Connect white/clear

pneumatic tube to the

port marked with a full

round symbol.

Partial Flush

Connect green pneumatic

tube to the port marked

with a half round symbol.

Step 2

Connect power supply

Wiring Transformer

Wire the transformer to a suitable 3A

fused spur. Ensure all electrical work is

undertaken by a qualied electrician

and is in compliance with all relevant

statutory electrical standards.

Power Up

Plug the power jack into

the socket in the rear of

the unit.

Note: When powered up

the front icons will ash

red, green then blue.

Step 3

Flush test. Place the unit onto the mounting frame (no need to lock) and initiate

a full and partial ush independently by waving a hand in front of the ush icon.

If successful proceed to Section 5 Fill Delay

If either or both ushes were unsuccessful proceed to Section 4 Boosting