cascade corporation C Series Service Manual - Page 11

Browse online or download pdf Service Manual for Forklifts cascade corporation C Series. cascade corporation C Series 14 pages. Integral sideshifter
Also for cascade corporation C Series: User Manual (12 pages)

Print Page

ERVICE

Rod Seal Carrier

4.3-2

Replacement

NOTE: The rod seal carriers are the only field serviceable

parts on the cylinder and are supplied with the seals

already loaded. The cylinder must be removed from the

carriage to replace the seals.

Remove the cylinder from the carriage as described in

Section 4.3-1.

Clamp the end of the cylinder in a soft-jawed vise.

CAUTION: Do not clamp on the cylinder shell. Clamp

on the ends of the cylinder only.

Unscrew the seal carrier from each end of the cylinder

and slide off the cylinder rod.

For reassembly, reverse the above procedures with the

following exceptions:

• Break any sharp edges on the cylinder rod end and

clean with solvent.

• Make sure seals and O-ring are in place. Apply

a thick film of petroleum jelly to the interior bore.

Carefully slide the seal carrier onto the cylinder

rod and screw into the cylinder retainer. Tighten to

240 ft.-lbs. (325 Nm).

Rod U-Cup

Pressure Seal

6020275-R2

O-Ring

Wiper

Retainer

SS0449.eps

Seal Carrier

Rod Seal

Carrier

SS0450.eps

Cylinder

Assembly