cascade corporation C Series Service Manual - Page 9

Browse online or download pdf Service Manual for Forklifts cascade corporation C Series. cascade corporation C Series 14 pages. Integral sideshifter
Also for cascade corporation C Series: User Manual (12 pages)

Print Page

ERVICE

Bearings

4.2

Bearing Lubrication

4.2-1

Lubricate both the upper and lower sideshifter bearings

with chassis grease every 1000 hours or 13 weeks of

operation, whichever occurs first. In contaminated

environments lubricate every week or as required.

Bearing Service

4.2-2

Remove the sideshifter frame from the truck carriage as

described in Section 4.1.

Remove the upper bearings and check thickness as

shown. Replace all the upper bearings if any bearing is

worn to less than:

A – .10 in. (2.5 mm)

and

B – .08 in. (2.0 mm)

IMPORTANT: Make sure that new upper bearings

are properly seated in upper integral carriage bar, as

shown. Lower hook clearance will not be correct if

upper bearings are installed incorrectly.

Remove the lower bearings by prying them from the

lower integral carriage bar. If any bearing is worn to

less than 3/32 in. (2.5 mm) thickness, replace all the

lower bearings.

Clean integral carriage bars with solvent and inspect for

damage.

For reassembly, reverse the above procedures with the

following exceptions:

• Grease upper and lower bearings with

general-purpose chassis grease.

Lower Bearings

6020275-R2

Integral Carriage Bars

3/32 in.

(2.5 mm)

min.

SS0445.eps

Upper Bearings

SS0446.eps

Front View

Upper Bearing

Grease Fittings

SS0443.eps

Lower Bearing

Grease Areas

Front View

Check Bearing

Thickness

SS1079.eps