Danfoss iC7 Series Installation Manual - Page 7

Browse online or download pdf Installation Manual for DC Drives Danfoss iC7 Series. Danfoss iC7 Series 16 pages. In-bottom/out-back cooling kit for fa09-fa10, frequency converters
Also for Danfoss iC7 Series: Installation Manual (8 pages), Installation Manual (8 pages), Installation Manual (6 pages), Installation Manual (14 pages), Installation Manual (16 pages), Installation Manual (8 pages), Installation Manual (8 pages), Installation Manual (10 pages), Installation Manual (16 pages), Installation Manual (6 pages), Installation Manual (6 pages), Installation Manual (16 pages), Installation Manual (18 pages)

Print Page

In-bottom/Out-back Cooling Kit for FA11-FA12

Installation Guide

6X S-M10-2Z1

3 (0.1)

Illustration 5: Vent Dimensions for FA12 Mounting Plate in 800 mm (32 in) Cabinet

2.4 Creating Vent Opening in the Backplate

To create a vent opening in the cabinet backplate, use the following steps. Use the dimensions in

cabinets, and

Illustration 7

for 800 mm (32 in) cabinets.

Procedure

Cut out the vent opening in the cabinet backplate using the template dimensions.

The opening must match the frequency converter vent opening.

Drill 8 screw holes (6 mm) around the vent opening using the template dimensions.

The holes must match the holes in the outer flange of the back duct.

7 (0.3)

699 (27.5)

Installation

23 (0.9)

0.0

100 (3.9)

2X 137 (5.3)

158 (6.2)

169 (6.7)

314 (12.3)

326 (12.8)

2X 347 (13.7)

1645 (64.7)

Illustration 6

for 600 mm (24 in)

AN361429392581en-000201 / 136R0253 | 7