Danfoss iC7 Series Panduan Instalasi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penggerak DC Danfoss iC7 Series. Danfoss iC7 Series 16 halaman. In-bottom/out-back cooling kit for fa09-fa10, frequency converters
Juga untuk Danfoss iC7 Series: Panduan Instalasi (8 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (14 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (10 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (18 halaman)

In-bottom/Out-back Cooling Kit for FA11-FA12

Installation Guide

6X S-M10-2Z1

3 (0.1)

Illustration 5: Vent Dimensions for FA12 Mounting Plate in 800 mm (32 in) Cabinet

2.4 Creating Vent Opening in the Backplate

To create a vent opening in the cabinet backplate, use the following steps. Use the dimensions in

cabinets, and

Illustration 7

for 800 mm (32 in) cabinets.

Procedure

Cut out the vent opening in the cabinet backplate using the template dimensions.

The opening must match the frequency converter vent opening.

Drill 8 screw holes (6 mm) around the vent opening using the template dimensions.

The holes must match the holes in the outer flange of the back duct.

7 (0.3)

699 (27.5)

Installation

23 (0.9)

0.0

100 (3.9)

2X 137 (5.3)

158 (6.2)

169 (6.7)

314 (12.3)

326 (12.8)

2X 347 (13.7)

1645 (64.7)

Illustration 6

for 600 mm (24 in)

AN361429392581en-000201 / 136R0253 | 7