Dunavox DAUF-46.145DB Instruction Manual - Page 8
Browse online or download pdf Instruction Manual for Wine Cooler Dunavox DAUF-46.145DB. Dunavox DAUF-46.145DB 14 pages.
Print Page
SN
+10°C to +32°C
N
+16°C to +32°C
ST
+16°C to +38°C
T
+16°C to +43°C
NOTE:
Units with no heater will not raise their
internal temperature if the ambient temperature
where the unit is located is lower than the set
temperature.
NOTE:
•
When you use the appliance for the
first time or restart the appliance after
having been shut off for a long time,
there could be a few degrees variance
between the temperature you select
and the one indicated on the LED
readout. This is normal and it is due to
the length of the activation time. Once
the unit is running for a few hours
everything will be back to normal.
•
If the unit is unplugged, power lost, or
turned off, you must wait 3 to 5
minutes before restarting the unit. If
you attempt to restart before this time
delay, the unit will not start.
USE AND CONTROL
CONTROL PANEL
For Dual Zone
1.Lock/unlock 2.Upper Temp. Plus
3.Upper Temp. Minus 4.Display Window
5.Lower Temp. Plus 6.Lower Temp. Minus
7.Lighting
POWER ON/OFF CONTROL
When the appliance is plugged in to a power outlet, it
powers on automatically.
Press
or
to adjust the temperature of upper
zone.
Press
or
to adjust the temperature of lower
zone.
Press left
and
at the same time for 3 seconds
to power on/off.
Press right
and
at the same time for 3
seconds to switch between ºC and ºF.
UNLOCKING THE CONTROL PANEL
To unlock the control panel, touch the lock button
and hold for 3 seconds till a buzz sound is heard.
The control panel will be automatically locked after
15 seconds without being touched. Under the locked
condition, the control panel will not react to any
touching order for Lighting On/Off and Temperature
Setting.
INTERIOR LIGHTING ON/OFF CONTROL
Under the unlocked condition, touch the lighting
mark
to turn on/off the LED light or change the
light color into 3 different colors (green / blue / red).
The lighting will stay on until it is automatically turned
off.
TEMPERATURE DISPLAY WINDOW
The temperature is displayed in digital format which
is the best way to be read out. The display shows
the set temperature when you are setting the
temperature, and it will display the real temperature
of the inside cabinet after 5 seconds.
When the temperature probe is out of order, the
display will show "HH" or "LL" instead of a digital
figure while continuous buzz sound will be heard. In
such case the wine cooler keeps on cooling as it is
considerately designed to keep periodical running of
compressor and fans which helps to keep the
coldness of the inside cabinet to protect your stored
wines.
TEMPERATURE RANGE SETTING
After the unit is unplugged, the system will return to
default setting temperature, which set by factory
For Dual Zone
The default temperature setting ranges: +5 to +12
ºC (41-54 ºF) for the upper zone and +12 to +20 ºC
(54-68 ºF) for the lower zone.
To set a temperature range as desired, please make
sure the control panel is under unlocked condition.
TEMPERATURE SETTING
For Dual Zone
The default temperature setting ranges are: 5-12 º
C (41-54 ºF) for the upper zone and 12-20 ºC (54-68
ºF) for the lower zone.
Directly touch the left
compartment temperature as you want. Touch the
right
or
mark to set the lower compartment
temperature as you want. The first touch on mark
or
will recall the previous set temperature
displayed. Touch the
temperature by 1ºC (or by 1ºF). On the contrary,
touch the
mark to decrease the set temperature
by 1ºC (or by 1ºF). After stopping pressing the
button for 5 seconds, LED figure will stop flash, then
revert to display the setting temperature of the upper
or lower compartment.
or
mark to set the upper
mark to increase the set