Danfoss ECL Comfort 110 User Manual, Installation & Maintenance - Page 6
Browse online or download pdf User Manual, Installation & Maintenance for Thermostat Danfoss ECL Comfort 110. Danfoss ECL Comfort 110 19 pages. Application 130
Also for Danfoss ECL Comfort 110: Datasheet (8 pages), Installation Manual (8 pages), Mounting Manual (8 pages), Quick Manual (2 pages), Quick Manual (2 pages), Quick Manual (2 pages)
Print Page
See or change the start ('Start2') of the next comfort period.
See or change the next start / stop periods, if necessary.
The schedule has always two comfort periods a day. The start and stop times can be set in
half-hourly intervals (30 min.).
10
VI.KT.F2.02
© Danfoss 06/2008
DH-SMT/DK
Maintenance
2 sec.
Enter the maintenance menus.
Date - time
It is only necessary to set the correct date and time in connection with the first use of the
ECL Comfort 110 controller or after a power break of more than 36 hours (see the chapter
on
Adapting the ECL Comfort 110 controller).
Flow temp. (flow temperature control)
Temp. min. (flow temp. limit, min.)
Setting range
-20 ... 110 °C
Set the allowed min. flow temperature for your system. Adjust the factory setting, if
required.
Temp. max. (flow temp. limit, max.)
Setting range
10 ... 150 °C
Set the allowed max. flow temperature for your system. Adjust the factory setting, if
required.
The setting for 'Temp. max.' has higher priority than 'Temp. min.'.
VI.KT.F2.02
DH-SMT/DK
1000
2000
2177
Factory setting
10 °C
2178
Factory setting
90 °C
© Danfoss 06/2008
11