Danfoss ECtemp 530 Installation Instructions Manual - Page 6
Browse online or download pdf Installation Instructions Manual for Thermostat Danfoss ECtemp 530. Danfoss ECtemp 530 16 pages.
Also for Danfoss ECtemp 530: Installation Manual (16 pages)
Print Page
Please also note the following:
▪ The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
▪ The thermostat must be connected to a power supply
via an all-pole disconnection switch.
▪ The sensor is to be considered as live voltage. Have
this in mind if the sensor must be extended.
▪ Always connect the thermostat to continuous power
supply.
▪ Do not expose the thermostat to moisture, water, dust,
and excessive heat.
2
Mounting Instructions
6
Place the thermostat at a suitable height
on the wall (typically 80-170cm.).
In wet rooms, place the thermostat accord-
ing to local regulation on IP classes.
ECtemp 530
Installation Guide