Danfoss ECtemp 530 Installation Instructions Manual - Page 7

Browse online or download pdf Installation Instructions Manual for Thermostat Danfoss ECtemp 530. Danfoss ECtemp 530 16 pages.
Also for Danfoss ECtemp 530: Installation Manual (16 pages)

Print Page

ECtemp 530

▪ Place the floor sensor in a conduit in an appropriate

place where it is not exposed to sunlight or draft

from door openings.

▪ Equally distant and >2cm from two heating cables.

▪ The conduit should be flush with the floor surface -

countersink the conduit if necessary.

▪ Route the conduit to the connection box.

▪ The bending radius of the conduit must be min

50mm.

Installation Guide

Note: A floor sensor enables a more accu-

rate temperature control and is recom-

mended in all floor heating applications

and mandatory under wooden floors to

reduce the risk of over-heating the floor.