Danfoss ECtemp 531 Installation Manual - Page 6
Browse online or download pdf Installation Manual for Thermostat Danfoss ECtemp 531. Danfoss ECtemp 531 16 pages.
Also for Danfoss ECtemp 531: Installation Manual (12 pages)
Print Page
1.2
Safety Instructions
Make sure the mains supply to the thermostat is turned off
before installation.
IMPORTANT: When the thermostat is used to control a
floor heating element in connection with a wooden floor or
similar material, always use a floor sensor and never set the
maximum floor temperature to more than 35°C.
Please also note the following:
• The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
• The thermostat must be connected to a power supply
via an all-pole disconnection switch.
• Always connect the thermostat to continuous power
supply.
• Do not expose the thermostat to moisture, water,
dust, and excessive heat.
6
Danfoss ECtemp 531
Installation Guide