Danfoss ECtemp 531 Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з монтажу для Терморегулятор Danfoss ECtemp 531. Danfoss ECtemp 531 16 сторінок.
Також для Danfoss ECtemp 531: Посібник з монтажу (12 сторінок)

Друкувати сторінку

1.2

Safety Instructions

Make sure the mains supply to the thermostat is turned off

before installation.

IMPORTANT: When the thermostat is used to control a

floor heating element in connection with a wooden floor or

similar material, always use a floor sensor and never set the

maximum floor temperature to more than 35°C.

Please also note the following:

• The installation of the thermostat must be done by an

authorized and qualified installer according to local

regulations.

• The thermostat must be connected to a power supply

via an all-pole disconnection switch.

• Always connect the thermostat to continuous power

supply.

• Do not expose the thermostat to moisture, water,

dust, and excessive heat.

Danfoss ECtemp 531

Installation Guide