Danfoss APP 3.0 Disassembling And Assembling Instructions - Page 8

Browse online or download pdf Disassembling And Assembling Instructions for Water Pump Danfoss APP 3.0. Danfoss APP 3.0 12 pages.
Also for Danfoss APP 3.0: Instruction Manual (8 pages)

Print Page

Danfoss APP 3.0 Disassembling And Assembling Instructions

Disassembling and Assembling, APP 1.5-3.5

Service guide |

8 | 180R9091 | DKCFN.PI.013.EF5.02 | 521B0741

5. Using the plastic tool provided, large

diameter first, press the seal home against

the shoulder, by hand.

7. Push the new ceramic ring into the flange

using the plastic tool provided. Make sure

the face with the rubber seal is positioned

against the shoulder in the flange.

Wet the parts with clean (filtered) soap-

water before assembly.

9. To prevent cold welding, lubricate

threads on the 4 screws with grease and

screw them into the pump and tighten

by hand. Use Molykote® D paste from Dow

Corning or Klüber UH1 84-201 from Klüber

lubrication. Tighten the 4 flange screws

according to exploded view.

6. Remove ceramic ring from the flange.

8. Position the O-ring on the seal SAE flange.