Danfoss APP 3.0 Instruções de desmontagem e montagem - Página 8
Procurar online ou descarregar pdf Instruções de desmontagem e montagem para Bomba de água Danfoss APP 3.0. Danfoss APP 3.0 12 páginas.
Também para Danfoss APP 3.0: Manual de instruções (8 páginas)
Imprimir página
Disassembling and Assembling, APP 1.5-3.5
Service guide |
8 | 180R9091 | DKCFN.PI.013.EF5.02 | 521B0741
5. Using the plastic tool provided, large
diameter first, press the seal home against
the shoulder, by hand.
7. Push the new ceramic ring into the flange
using the plastic tool provided. Make sure
the face with the rubber seal is positioned
against the shoulder in the flange.
Wet the parts with clean (filtered) soap-
water before assembly.
9. To prevent cold welding, lubricate
threads on the 4 screws with grease and
screw them into the pump and tighten
by hand. Use Molykote® D paste from Dow
Corning or Klüber UH1 84-201 from Klüber
lubrication. Tighten the 4 flange screws
according to exploded view.
6. Remove ceramic ring from the flange.
8. Position the O-ring on the seal SAE flange.
© Danfoss | DCS (im) | 2017.08