Dunster House MONKEY BARS Installation Manual - Page 10

Browse online or download pdf Installation Manual for Play Sets & Playground Equipment Dunster House MONKEY BARS. Dunster House MONKEY BARS 10 pages. Monkey bars
Also for Dunster House MONKEY BARS: Installation Manual (16 pages)

Print Page
Step 10 - required components
4 of Ground anchor
A
Fill all unused holes with the
10mm dowels provided.
Ground anchors
A hole will need to be dug for each ground anchor (for locations of ground anchors see above diagram). The disc end of
the ground anchor needs to be placed in the dug hole. To attach the looped end of the anchor to the ladders,
pre-drilled holes (using a 8mm drill bit) will need to be drilled before screwing the anchors using the
screws and washers provided. It is important that the ground anchors are connected to the tower legs and ladder
as low down as possible to reduce tripping hazards. When the anchors are firmly attached to the climbing frame, fill
in the holes with compacted soil. If you find that the soil does not hold the anchors in place sufficiently when the tower
is in use, concrete will need to be used to secure them.
Assembly Instructions for Monkey Bars
4 of M10x70mm hex head screws
4 of M10x30mm washers
A
M10x70mm hex head screw
M10x30mm washer
A
Ground anchor
A
A
Page 9