Danfoss VLT Midi Drive FC 280 Installation Instructions - Page 2
Browse online or download pdf Installation Instructions for Media Converter Danfoss VLT Midi Drive FC 280. Danfoss VLT Midi Drive FC 280 4 pages. Fan replacement
Also for Danfoss VLT Midi Drive FC 280: Installation Instructions (2 pages), Installation Instructions (4 pages), Installation Instructions Manual (6 pages), Installation Instructions (4 pages)
Print Page
Installation Instructions
Installation
Enclosure Sizes K1, K2, and K4
1.
Grab the center handle on the fan and use a flat-
edged screwdriver to release the retaining lever.
Illustration 1.1 Removing Fan on Enclosure Sizes K1, K2, and K4
2.
Unplug the fan cable.
Illustration 1.2 Fan Cable Plug. Plug Location Depends on Fan
Type.
2
Fan Replacement
®
VLT
Midi Drive FC 280
NOTICE
For VLT
3.
Enclosure Size K3
1.
Illustration 1.3 Removing Fan Screw on Enclosure Size K3
2.
Illustration 1.4 Pulling out Fan on Enclosure Size K3
Danfoss A/S © 11/2015 All rights reserved.
®
Midi Drive FC 280, the fan cable has 3 wires.
Connect the new fan cable and click the new fan
into place.
Remove the M3x6 screw in the bottom right corner.
Press the levers on each side of the fan and pull the
fan outwards.
MI07D102